User Manual

12
Cleaning the Blender
• Clean the Blender thoroughly after every use. Be sure to unplug before cleaning.
• To avoid damaging the Blender, do not immerse the Blender base or cord in water.
• To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
1
To clean the Blender base and cord:
Unplug the Blender before cleaning.
Wipe with a warm, damp cloth; wipe
clean with a damp cloth, and dry with
a soft cloth. Make sure to clean inside
the ingredient feed each time.
3
To clean pitcher, lid, ingredient cap, and funnel: Wash all items in the dishwasher
on the top or bottom rack. Or hand wash with soapy water, rinse, and wipe dry. Make sure
that all Blender parts are dry before storing for longer periods of time.
CARE AND CLEANING
2
To quickly clean the Blender while
in the base: Add 1 drop of dish soap
to half a pitcher of water, and run on
the Icy Drinks/Smoothies cycle. Discard
water when cycle is finished, and rinse
completely.
TROUBLESHOOTING
NOTE: For best results when cleaning the Blender, completely disassemble the lid,
ingredient cap and funnel and thoroughly wash all parts after each use.
W10679580A_EN_v14.indd 12 12/15/14 4:35 PM