5KSB6060 W11122478A_01_EN_v06.
ENGLISH TABLE OF CONTENTS PARTS AND FEATURES ��������������������������������������������������������������������������������������������6 Parts and accessories �����������������������������������������������������������������������������������������6 BLENDER SAFETY ����������������������������������������������������������������������������������������������������7 Important safeguards ����������������������������������������������������������������������������������������7 Electrical requirements �������
PARTS AND FEATURES PARTS AND ACCESSORIES Ingredient-measuring cap Tamper Lid Blender jar Blade Power cord (not shown) Removable blender jar pad Control dial Base Pulse toggle switch Start/Stop toggle switch Status indicator light 6 | PARTS AND FEATURES W11122478A_01_EN_v06.
ENGLISH BLENDER SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock, do not put Blender in water or other liquid. 3.
BLENDER SAFETY 4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 5. Children should be supervised to ensure that they do not play with the appliance. 6. This appliance shall not be used by children under 8 years.
13. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running. 14. Flashing light indicates ready to operate — avoid any contact with blades or movable parts. 15. Do not use the Blender outdoors. 16. Be careful if hot liquid is poured into the Blender as it can be ejected out of the appliance due to sudden steaming. 17. Always operate Blender with lid in place. 18.
BLENDER SAFETY ELECTRICAL REQUIREMENTS Voltage: 220-240 V Frequency: 50-60 HZ Power (Wattage): 1800 watts NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter. Electrical Shock Hazard Plug into an earthed outlet. Do not remove earth prong. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance. Do not use an adapter.
ENGLISH BLENDER SAFETY ELECTRICAL EQUIPMENT WASTE DISPOSAL Disposal of packing material The packing material is 100% recyclable and is marked with the recycle symbol . The various parts of the packing must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal. Scrapping the product - This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
USING THE BLENDER BLENDER FUNCTION GUIDE The Blender features Variable Speed and Pulse functions that allow you to customise your blending for any recipe you make. You might find that not all recipes are exactly the same, and sometimes a recipe might blend more to your preference on a speed that is not obvious. For example, when making a smoothie, you may prefer the finer texture that a higher speed creates. We encourage you to experiment to find the best speed for your favourite recipes.
PREPARING THE BLENDER FOR USE Before first use Before using your Blender for the first time, wipe the blender base with a warm, damp cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash the blender jar, lid, tamper, and ingredient-measuring cap in warm, sudsy water (see the “Care and cleaning” section). Rinse parts and wipe dry. ENGLISH USING THE BLENDER Electrical Shock Hazard Plug into an earthed outlet. Do not remove earth prong. Do not use an adapter. Do not use an extension cord.
USING THE BLENDER ASSEMBLING AND RUNNING THE BLENDER 1 Put the items to blend into the blender jar. Add liquids first, then soft foods, then leafy greens, and ice or frozen items last. 2 Make sure that the lid is fully secured on the blender jar. Next, place the blender jar on the base, making sure that it is fully aligned on the jar pad. 4 Turn the control dial to your desired speed. See the “Blender function guide” for more information.
5 Use the tamper accessory as needed for optimal blending performance. Remove the ingredient-measuring cap only, and leave the lid in place. Stir or press contents down towards the blade. When you are finished, replace the ingredient-measuring cap to the blender jar lid before resuming blending. 7 After blending, flip the START/STOP toggle switch up or down. Allow the Blender to come to a complete stop before removing the lid and pouring your blended ingredients.
CARE AND CLEANING CLEANING THE BLENDER AND ACCESSORIES Clean the Blender thoroughly after every use. NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in water. To avoid scratching the Blender, do not use abrasive cleansers or scouring pads. 1 To clean the blender base and cord: Unplug the Blender before cleaning. Wipe the base and the cord with a warm, damp cloth; wipe clean with a damp cloth, and dry with a soft cloth.
3 Rotate the control dial to speed 10. Flip the START/STOP toggle switch up or down. Run the Blender on speed 10 for 35 seconds. Flip the START/STOP toggle switch up or down to stop the Blender. When the blade stops spinning, pour out the soapy water, and rinse the blender jar with warm water. When cleaning after some recipes (hummus, nut butters) it might be necessary to repeat these steps.
TROUBLESHOOTING Electrical Shock Hazard Plug into an earthed outlet. Do not remove earth prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. When the Blender is plugged in and the main power On/Off toggle switch is on, the Blender will go into Standby mode (flashing white indicator light). However, after 10 minutes of no activity the Blender will go into Sleep mode and the indicator light will turn off.
ENGLISH WARRANTY AND SERVICE KITCHENAID BLENDER WARRANTY Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe, Middle East and Africa: 5KSB6060XX Ten years full warranty from date of purchase. The replacement parts and repair labour costs to correct defects in materials or workmanship. Service must be provided by an Authorised KitchenAid Service Centre. A. Repairs when Blender is used for operations other than normal household food preparation. B.
©2017 All rights reserved. W11122478A W11122478A_19_back.