Operation Manual

INSTALLATI
ON INSTRUCTIONS
Freestanding Outdoor Grill Installation
Unpac
k Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
4. Remove the
grill grates (F).
5. Remove warming rack (E) on brackets as
shown.
F
E
A
ttach right side shelf
IMPORTANT: This step is meant to help with the
installation, but do not depend solely on the two
screws to hold the weight of the side shelf.
1. Unpack right side shelf (
C).
2. Loosen and remove 3 screws on left side shelf.
3. Loosen but do not remove the 2 screws on the side panel (A),
remove the screw lock on the main control panel (B).
A
B
4. Align slots on the side shelf with the loosened scre
ws. Hook
the side shelf onto the two loosened screws and let the shelf
slide down so the screws are in the narrow neck of the slots.
1. Use a utility knife to cut straps and packing tape to open
box from top and remove the boxes.
2. Remove the warming shelf and grill grates from inside the
grill and remove the package inside the firebox.
3. Remove foam block and wrap from inside the grill.
12