Operation Manual

1. A combinat

ion of pipe fittings must be used to connect the grill

to the existing gas line.

 The 10 ft (3.0 m) PVC flexible gas supply hose design

certified by CSA must be used.

 Pipe-joint compounds suitable for use with Natural gas

must be used. Do not use Teflon®+ tape.

 There must be a certified manual shut-off valve in the gas

supply line near the grill for easy access.

2. Connect the brass connector on one end of the 10 ft (3.0 m)

PVC flexible gas supply hose to the Natural gas pressure

regulator.

3. Connect the quick connector on the other end of the

10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural

gas supply pipe.

6. Use an adjustable wrench to install the Natural gas

regulator hose to the manifold and secure. Attach the

Natural gas regulator to the side panel inside the grill cart

with the two screws that are pre-assembled on the

regulator.

Conversion from LP Gas to

Natural Gas

1. Turn of

f the main gas supply valve.

2. Disconnect 20 lb LP gas fuel tank (if present).

3. Turn off all burner control valves.

4. Remove the 20 lb LP gas fuel tank (if present) from the grill cart.

5. Use an adjustable wrench to remove the LP regulator from the

manifold.

Installation of the regulator

Make Gas Connection

† ®Teflon is a registered trademark of E.I. Du Pont De Nemours

and Company.

A. Manifold

B. Left side panel

C.10 ft. (3.0 m) PVC gas hose

D. Natural gas pressure regulator/hose assembly