Operation Manual

Change Grill

Main Burner Valve Orifices

3. Use a 6 mm socket and wrench or 6 mm nut driver to remove

the brass orifice from the end of gas valve. The main burner

orifice is located behind the LP orifice, so no additional orifice

needs to be installed.

A. Main burner orifice

IMPORTANT: Check that the orifice is properly installed inside of the

burner opening.

4. Reinsert the burner and reattach using the screw and cotter clip

previously removed. Repeat the procedure for each main burner.

5. Position the igniters so they are 1/4" (6.0 mm) away from each

burner.

1. Remove the grates and flame tamers.

2. Remove 1 screw and cotter clip that hold the burner in place. Set

the screw and clip aside. Remove the burner from the grill by lifting

the burner out.

Change the Sear Burner Orifices

Remove the 2 screws securing the igniter and remove

the igniter from the side burner.

2. Remove the searing side burner screws. Set the screws

and cover aside.

A. Screw

B. Cotter Cl

ifice

orifice