Manual

13.Slidethebezelopeningoverthevalvestemandattachthe
sideburnervalveassemblyandbezeltothesideburnershelf
withthescrewsremovedinStep9.
A
16. Insert the valve stem into the knob and push knob into place.
III
iI
A. Bezel
B. Valve stem
14. Replace the searing side burner, angling it so that the valve
orifice goes into the side burner tube.
15. Connect electrical plugs on underside of sear burner.
17. The igniter battery is not factory installed. A "AA" size alkaline
battery is located in the accessory box on the grill grate.
Install battery at this time following the instructions in
"Replacing the Igniter Battery" section.
Attach Left Side Shelf
1. Unpack left side shelf.
2. Open grill lid.
3. Remove 3 screws from the side of the side shelf.
4=
A. Side shelf screws
Remove the 3 screws on the grill side panel and 1 screw on
the grill control panel.
...... J
A. Electrical plug from grill
B. Electrical plug from sear burner A
A. Grill side panel screws
B. Grill control panel screw
10