Installation Guide

5. Attach the top of the side shelf to the grill (B) by
inserting the 3 screws removed in Step 3 into the side
shelf from inside the grill hood and tighten. See
illustration in step
6. Attach the bottom of side shelf to the side panel (A) of
the grill by inserting the 2 screws removed from the grill
side panel in Step 4 Tighten these screw See illustration
5. Attach the top of the side shelf to the grill (A) by inserting
the 2 screws removed in Step 3 into the side shelf from
inside the grill hood and tighten. See illustration in Step 7.
6. Attach the bottom of side shelf to the side panel (B) of the
grill by inserting the 2 screws removed from the grill side
panel in Step 4 Tighten the screw See illustration in Step
B
A
side
panel
in
Step
4
.
Tighten
these
screw
.
See
illustration
in step 7.
7. Attach the side shelf to the control panel (C) by inserting
the screw removed from the grill control panel in Step 4.
Tighten the screw.
panel
in
Step
4
.
Tighten
the
screw
.
See
illustration
in
Step
7.
7. Attach the side shelf to the control panel (C) by inserting
the screw removed from the grill control panel in Step 4.
Tighten the screw.
B
C
Attach Right Side Shelf with Side Burner
8. Loosen the 2 screws from the side burner valve
assembly. See illustration in Step 10.
9.
Push the valve stem out through the opening in the front
1. Unpack right side burner.
2. Open grill lid.
3. Remove 3 screws from the side of the side burner.
9.
Push
the
valve
stem
out
through
the
opening
in
the
front
of the side burner shelf, lining up the holes in the side
burner valve assembly with the openings on the side
burner shelf. See illustration in Step 10.
10. Slide the bezel opening over the valve stem and attach
the side burner valve assembly and bezel to the side
burner shelf with the screws loosened in Step 8,
4. Loosen 2 screws on grill side panel and remove 1 screw
on grill control panel.
A
B
B
A. Bezel
B. Valve
A. Grill control panel screws
B. Grill side panel screws
15
and tighten the srews.
A