Installation Guide

Conversion from LP Gas to Natural Gas
GAS CONVERSION
Tools and Parts for Gas Conversion
Gather the required tools and parts before starting
installation. Read and follow the instructions
p
rovided with
p
any tools listed here.
Tools needed
 Phillip screwdriver
 Pipe Wrench
 Adjustable wrench
 6 mm socket and
wrench or 6 mm nut
 Thin 6” flat-blade
screwdriver
 Needle hose pliers
 Pipe thread sealant
certified for LP gas
1. Turn off all burner control valves.
2. Turn off the main gas supply valve.
3
Di t 20 lb LP f l t k (if t)
Installation of the regulator
Parts supplied
 Natural gas orifice for sear burner
Parts needed
 Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
 Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator
”
)
driver
3
.
Di
sconnec
t
20
lb
LP
gas
f
ue
l
t
an
k
(if
presen
t)
.
4. Remove the 20 lb LP gas fuel tank (if present) from the grill
cart.
5. Use an adjustable wrench to remove the LP regulator from
the manifold.
Regulator )
 10 ft (3.0 m) Natural gas hose with quick connector
 5.9" (150 mm) Natural gas regulator hose
 6 mm nut driver
 6 mm wrench
 Hex key
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the appliance prior to disconnecting the electrical
power.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach
the Natural gas regulator to the side panel inside
th ill t ith th t th t
th
e gr
ill
car
t
w
ith
th
e
t
wo screws
th
a
t
are pre-
assembled on the regulator.
20