Installation Guide

o Disconnect the 20 lb LP Gas Fuel Tank:

1. Check that the burner control knobs are in the “Off” position

and the grill is cool.

2. Check that the 20 lb LP gas fuel tank is in the “Off” position. If

not, turn the valve clockwise until it stops.

3. Using your hand, turn the gas pressure regulator/hose

assembly counterclockwise to disconnect to the 20 lb LP gas

fuel tank as shown.

Hand loosen only. Use of a wrench could damage the quick

coupling nut.

4. Place dust cap on cylinder valve outlet whenever the cylinder

is not in use. Only install the type of dust cap on the cylinder

valve outlet that is provided with the cylinder valve. Other

types of caps or plugs may result in leakage of propane.

Gas pressure regulator/hose assembly

B. 20 lb LP gas fuel tank