Installation Guide

BUR

NERS

Cleaning Method:

■

Clean the exterior of the burner with a wire brush.

■

Clear any cl

ogged burner ports with a straightened paper

clip.

■

Do not use

a toothpick as it may break off and clog the port.

■

eck and clean burner/venturi tubes.

1. Remove grill grates and flame tamers.

2. Remove the 1 screw and cotter clip that hold the burner

in the place. Remove gas burner from the grill.

3. Use a flashlight to inspect into the burner through the

burner inlet to ensure there is no blockage. If any

obstruction is seen, use a metal coat hanger that has

been straightened to clear them.

4. After inspecting the inside of burner for blockage,

reassemble burner by sliding the middle tube of the gas

burner over the gas orifice.

5. Reattach gas burner using 2 screws.

SIDE BUR

NER

Clean

ing Method:

■

Clean the exterior of the side burner with a wire brush.

2 screws

A. Burner/orifice connection