Operation Manual

INSTALLATION INSTRUCTIONS

Freestanding Outdoor Grill Installations

Har

dware contents pre-installed

as noted in instructions

that follow.

REF# Description QTY

1 1/4"*15mm Truss Head Scr

ew 12pcs

4pcs

Preparation

Before beginning asse

mbly, make sure all parts are present.

Compare parts with package contents list and diagram above. If

any part is missing or damaged, do not attempt to assemble the

product. Contact customer service for replacements parts.

 Estimated Assembly Time: 20 minutes



Note: The right and left sides of the grill are designated as if

you are facing the front of the grill.

Swivel Caster Assembly

1. Unpack bottom panel an

d 2 casters. Note that there are 2

casters pre-assembled to the bottom panel. Check and make

sure the 2 pre-assembled casters have not loosened during

transit. Remove 8 pre-assembled screws from the bottom panel

and use those screws to secure the 2 casters. The locking

caster is to be located at the rear of the bottom panel.

Cart As

sembly

1. Unpack both side panels and the rear panels. Loosen the 8

screws which are pre-assembled to the bottom panel and the 6

pre-assembled screws on the side panels.

2. Secure the lef

t side panel by clipping the open hole onto the

screws which is pre-assembled to the bottom panel and tighten

the 3 screws.

1/4"*8mm Truss Head Screw

2 2pcs

1/4"*8mm Stage Screw

5/32"*10mm Countersunk Head

4pcs

5/32"*10mm Truss Head Screw

2pcs

Screw