Installation & Assembly

3. Connect the quick connector on the other end of the 

10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural gas

supply pipe (B).

A. Brass connector

B. Quick connector

Change Grill Main Burner Valve Orifices

1. Remove the grates and flame tamers.

2. Remove the screw and clip that hold the burner in place. Set the

screw and clip aside. Remove the burner from the grill by lifting the

burner out.

3. Use a 6 mm socket and wrench or 6 mm nut driver to remove the

brass orifice from the end of gas valve. The main1* burner orifice is

located behind the LP orifice, so no additional orifice needs to be

installed.

A. Main burner orifice

POR

: Check

that

the orifice

is p

roperly installed inside of

the gas valve.

4. Reinsert

the burner and reattach using the screw and clip previously

removed. Repeat the procedure for each main burner.

5. Position the igniters so they are ¼" (6.0 mm) away from each burner.

Change the Rotisserie/Infrared Burner Orifice

1. Using a Phillips screwdriver, unscrew the 2 screws and remove the

rotisserie/infrared burner wind baffle.

A. Wind baffle