Owners manual

Grease Cup Bracket Installation

1. Loosen and remove the 4 screws preassembled on the grease

Attach the left and right grease cup bracket on firebox bottom

panel under side, align screw holes, insert 4 screws which moved

from step 1 into these screw holes. Screws lock from firebox

cup bracket.

bottom panel under side.

3. Tighten these 4 screws.

LP Gas Installation

1. Check that the LP

gas pressure regulator/hose assembly is

positioned under the grill (as shown in the following illustration)

and is not pinched or kinked.

2. Use 2 screws and the 1-piece 90° clamp mounting bracket provided

to attach the 90° brass connector to the back of the enclosure. The

brass connector is located between the flexible gas hose and the LP

gas pressure/hose assembly.

A. 2 screws

B. 1 piece 90° clam

p mounting bracket

Install Grill

Place grill into outdoor enclosure, but leav

e enough room in the back to

connect to the gas supply.