Manual

Place grill into outdoor enclosure, but leave enough room in the back to
connect to the gas supply.
Grease Cup Bracket Installation
1. Loosen and remove the 4 screws preassembled on the grease
cup bracket.
LP Gas Installation
1.
Cheek that the LP gas pressure regulator/hose assembly is
positioned under the grill (as shown in the following illustration)
and is not pinched or kinked.
Use 2 screws and the 1-piece 90° clamp mounting bracket provided
to attach the 90° brass connector to the back of the enclosure. The
/////
//
/.
brass connector is located between the flexible gas hose and the LP 2. Attach the left and right grease cup bracket on firebox bottom
gas pressure/hose assembly, panel under side, align screw holes, insert 4 screws which moved
from step 1 into these screw holes. Screws lock from firebox
bottom panel under side.
B
A
A. 2 screws
B. one piece brass clamp mounting bracke
3. Tighten these 4 screws.
13