Manual

Connect the quick connector on the other end of the

10' (3.0 m) PVC flexible gas supply hose to the rigid Natural gas

supply pipe (B).

A. Brass connector

B. Quick connector

Change Grill Main Burner Valve Orifices

1. Remove the grates and flame tamers.

2. Remove the screw and clip that hold the burner in place. Set the

screw and clip aside. Remove the burner from the grill by lifting the

burner out.

3. Use a 6 mm socket mad wrench or 6 mm nut driver to remove the

brass orifice from the end of gas valve. The main burner NG orifice is

located behind the LP orifice, so no additional orifice needs to be

installed.

A. JJain burner orifice

4. Reinsert the burner and reattach using the screw and the clip

previously removed. Repeat the procedure for each main burner.

5. Position the igniters so they are ¼" (6.0 mm) away from each burner.

Change the Rotisserie/Infrared Burner Orifice

1. Using a Phillips screwdriver, unscrew the 2 screws and remove the

rotisserie/infi'ared burner wind baffle.

A. Wind baffle