Instructions / Assembly

◼
Natural gas regulator (marked “Natural Gas Regulator”)
◼ 10 ft (3.0 m) PVC flexible gas supply hose with quick
connector
◼ 5.9 in. NG regulator hose
◼ 6 mm wrench
◼ 6 mm nut driver
◼ Hex key
◼
Tape Measure
◼
Small, flat-blade screwdriver
◼
Flat-blade screwdriver
◼
#2 and #3 Phillips screwdriver
◼
Level
◼
Wrench or pliers
◼
Pipe wrench
◼
Scissors or cutting pliers (to remove tiedowns)
◼
Noncorrosive leak-detection solution
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Configuration: Stand-Alone Side Searing Burner (760-0024)
Tools needed
Parts Supplied for 20 lb LP Gas Installation
◼ Gas pressure regulator/hose assembly set for 11" WCP LP gas
◼ LP gas fuel tank tray
Parts Supplied for Conversion to Natural Gas
◼ 2.08 mm Natural gas orifice for side searing burner (Model 760-0024)
Parts Needed for Conversion to Natural Gas
◼ Natural gas conversion kit (Order Part Number 710-0003). Natural gas conversion kit includes:
◼ Gas line shut off valve
◼ ½" male pipe thread nipple for connection to pressure regulator
◼ LP gas-resistant pipe-joint compound
◼ CSA design-certified outdoor flexible stainless steel appliance connector (4-5 ft [1.2-1.5 m]) or rigid gas supply line as needed
11