Instruction for Use

17
After taking the above course of action, the fault message must be reset. In the majority of cases the fault
is thus eliminated.
RESET: - Press the Cancel/Off button.
- Close the door.
- Water drains automatically for up to 1 minute.
- The appliance is now ready to be restarted.
Crockery and cutlery... Possible causes... Solutions...
...are not perfectly clean/have food
residues
• Too little space between dishes
(incorrect arrangement of the concave
items in the rack).
• Arrange crockery so that items do not
touch each other. Concave items (e.g.
bowls, cups) must be arranged facing
downwards in the rack.
• Too little detergent; detergent too old or
incorrectly stored.
• If necessary, use more detergent,
observing the manufacturer’s
indications as regards dosage. Always
store detergent in a dry place and do
not store it for excessively long periods
of time.
• Temperature not high enough for
heavily soiled crockery.
• For heavily soiled crockery, select a
wash program with a higher
temperature (see table of programs).
• Loading of the dishwasher using lower
and upper rack at the same time with
“Half load/Multizone” option.
• If you select the “Half load/Multizone”
option (if available), remember to load
only the upper rack or only the lower
rack to increase washing power and
thus obtain optimum wash results.
• Clogged spray arms, dirty filters or not
fitted correctly.
• The spray arms must not be clogged,
the filters must not be dirty and must be
fitted correctly (see “Maintenance and
care“).
• Spray arms stuck impeded by crockery
or cutlery.
• The spray arms must be able to turn
freely and must not be impeded by
crockery or cutlery.
...have deposits: regeneration salt
residue
• Water too hard.
• In areas with very hard water, more
regeneration salt needs to be added (see
“How to set water hardness”).
• Salt reservoir cap open. • Close the salt reservoir cap properly.
• Not enough rinse aid.
• If you use a combined action detergent,
try adding more rinse aid.
...are not dry
• Plastic containers dry badly.
• Synthetic materials do not dry well; if
wet at end of cycle, wipe dry.
• Clean dishes left in dishwasher for a
long time after end of cycle (e.g. when
using “Delayed start” option).
• In this situation, the presence of drops
of water on dishes and on the sides of
the dishwasher is normal. Try releasing
the door 5 minutes before removing the
dishes.
• Incorrect arrangement of the concave
items in the rack.
• Arrange crockery so that water does not
collect in cavities.
• Incorrect dosage the rinse aid.
• Increase the dosage of rinse aid (see
“Adding rinse aid”).
Rapid program selected.
• The Rapid program 40°C / 45°C is
intended for quickly washing lightly
soiled dishes. If used for a full load of
medium/heavy soiled dishes, the dishes
may not dry completely. If so, select a
standard-length program. For best
results, open the door after the end of
the program and wait 15 minutes before
unloading the dishwasher.