Instruction for Use

7
Options and display description
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK
REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT
CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30
SECONDS IF NO CYCLE HAS STARTED.
1. WASH TIME DISPLAY
Indicated the cycle duration and the remaining time
(h:min). With “Delayed start” selected it indicates
the time remaining until program start (h.00) -
below 1h (0:min).
If “Fx Ey” messages appears on the display, see
chapter “What to do if...”.
2. HYGIENE
This function activates an antibacterial rinse at the
end of the wash cycle, guaranteeing a further
reduction of bacteria. Press the button to activate or
deactivate the function.
This function can be used with the programs
indicated in the table of programs. The dishwasher
door must be kept shut for the entire duration of the
program in order to guarantee reduction of bacteria.
If the door is opened the indicator lamp starts
flashing.
3. 1/2 LOAD BUTTON
Half load cycle can be used for the upper or lower
rack.
Select the required program then press the “Half
Load” button - the light comes on.
Turns off at the end of the program.
The “Half Load” option can be used with the
programs indicated in the table of programs.
4. TABLET SETTING
This setting allows to optimize the cycle
performances according the type of detergent used.
Push the Tablet button for 3 seconds (until the
indicator lights up) if you are using the combined
detergents in tablet (rinse aid, salt and detergent in
1 dose). If you are using powder detergent or gel
detergent, the Tablet indicator on the control panel
has to be off.
5. DELAYED START BUTTON
Push the button (repeatedly) to delay the start of
the program – delay indicator turns on.
Adjustable from 1 to 24 hours. With each press of
the button, the delay increases by one hour and
after "h 24" returns to "h 00”. When this option is
selected the delay indicator turns on. Then press
the START button. The dishwasher will start after
the set time.
6. SALT INDICATOR
When lit (at the end of the cycle), the salt reservoir
needs to be refilled.
7. RINSE AID INDICATOR
When lit (at the end of the cycle), the rinse aid
dispenser needs to be refilled.