Instruction for Use

10
Adding rinse aid (not necessary when you use
tablets). How to adjust the rinse aid dosage regulator
If required, open the cover B (press the dedicated
button).
Add rinse aid to the max. line ~150 ml
The rinse aid dosage can be adjusted to the detergent
used.
The lower the setting, the less rinse aid is dispensed
(factory setting: position 4).
Press the button to open the cover B. Using a coin or
similar object, turn the arrow to the desired setting.
After adjusting the rinse aid setting, shut the cover
again.
Check the rinse aid indicator to check the level
into the dispenser.
(depending on the model)
Rinse aid indicator on the control panel
The indicator lamp lights up when RINSE AID
NEEDS TO BE ADDED.
Rinse aid indicator on the dispenser
dark OK.
clear: NEEDS TO BE ADDED
Only use rinse aids recommended for use in
domestic dishwashers. Immediately wipe away
any rinse aid spilt accidentally. This prevents the
formation of excess suds which can cause a fault
function of the appliance.
If there are streaks: reduce the dosage by turning
the dial to a lower setting (1-3). If crockery is
not perfectly dry: increase the dosage by turning
the dial to a higher setting (5-6). Plastic dishes
have more difficulty drying and a higher rinse
aid setting will not improve the situation.
Detergents with rinse aid incorporated may be
effective only with longer programs. In the case
of shorter programs, detergent residue may be a
problem (if necessary, use powder detergent).
Detergents with rinse aid incorporated tend to
form excess suds.
Visual
indicator
Visual
indicator