user manual

9
aDjUstInG thE CUttInG BURRs
From the factory, the KitchenAid
®
PRO LINE™ Burr Coffee Mill will provide grinds
suitable for almost all types of brewing. If you’re an espresso or French Press
aficionado, however, you may wish to adjust the cutting burrs to provide optimum
performance for your style of brewing. With adjustment, the Burr Coffee Mill will easily
meet stringent Specialty Coffee Association of America grind-size specifications for
espresso (250 micron grind size) or French Press brewing (1500 micron grind size).
Adjusting for Maximum
Grind Fineness
Adjusting the mill to provide maximum
fineness will slightly decrease the grind
sizes throughout the grinding range. (To
adjust the mill to provide coarser grinds,
see page 10.)
Empty the bean hopper, then run
the mill a few seconds to clear any
remaining beans from the machine.
Turn the grind control dial to
level “8”.
Using a
5
⁄32-inch (4 mm) allen wrench
or hex-head screwdriver, remove the
screw located in the front of the grind
control dial by turning it counter-
clockwise. Hold the grind control dial
so that it does not rotate as the screw
is removed. Once the screw is free,
remove the grind control dial.
1.
2.
3.
The white grind
control gear should
be visible once the grind control dial
is removed.
Turn on the mill by flipping the
On/Off Switch to the “On” position.
4.
ENGLISH
Continued…