user manual

6 Changing the quantity of coffee in the cup
15
The appliance is factory preset to automatically deliver the following quantities of coffee:
- short (when the button is pressed);
- standard (when the button is pressed);
- long (when the button is pressed);
To change these quantities, proceed as follows:
- press the button corresponding to the quantity you want to change ( , or ) for at least 8
seconds until the message "PROGRAM QUANTITY" is displayed;
- when the coffee in the cup reaches the required level, press the same button again to memorise the
new amount.
7 Regulating the coffee mill
However, after making the first few coffees, if you find that coffee delivery is either too fast or too slow (in
drips), the grinding coarseness regulator can be adjusted (fig. 10).
Turning it 1 click (1 number) clockwise speeds up coffee delivery (without drips).
Turning it 1 click anticlockwise slows down delivery giving a creamier appearance to the coffee.
These adjustments will only be evident after at least 2 cups of coffee have been run off.
The grinding coarseness regulator must only be turned when the coffee mill is on.
Turn anticlockwise to obtain finer ground coffee, slower delivery and a creamier
appearance.
Turn clockwise for coarser ground coffee and faster delivery (not a drop at a time).
(Coffee has been used to factory test the appliance and it is therefore completely normal for there to be
traces of coffee in the mill. This appliance is however guaranteed to be new).
501974402003_UK 8-10-2007 13:47 Pagina 15