2 2.8 CUPS LITERS FOOD PROCESSOR Instructions and Recipes 5KFPCB700A Australia: 1800 990 990 New Zealand: 0800 881 200 KitchenAid.com.au KitchenAid.co.
Proof of Purchase & Product Registration Always keep a copy of the sales receipt showing the date of purchase of your Food Processor. Proof of purchase will assure you of in-warranty service. Before you use your Food Processor, please fill out and mail your product registration card packed with the unit. This card will enable us to contact you in the unlikely event of a product safety notification and assist us in complying with the provisions of the Consumer Product Safety Act.
Table of Contents INTRODUCTION Proof of Purchase & Product Registration............................................... Inside Front Cover Food Processor Safety......................................................................................................2 Important Safeguards......................................................................................................3 Electrical Requirements....................................................................................................
Food Processor Safety Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.
Important SafeGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock do not put Food Processor in water or other liquid. 3. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. 4. Avoid contacting moving parts. 5.
Electrical Requirements Model 5KFPCB700A: WARNING Volts: 230-240 V.A.C. Hertz: 50 Hz NOTE: Model 5KFPCB700A has a 3 prong grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not use an extension cord.
Food Processor Features 12-Cup (2.8 L) Work Bowl Heavy-Duty Base 2-Piece Food Pusher O | Pulse Dough Blade Work Bowl Cover with Tall Feed Tube Work Bowl Cover with Tall Feed Tube Feed tube accommodates long food items with a minimum of sectioning, so the entire length of the tube can be filled with food. Stainless Steel Multipurpose Blade 12-Cup (2.8 L) Work Bowl The durable bowl provides capacity for large jobs.
Preparing the Food Processor for Use 4. Insert the mulitpurpose blade or dough blade into the work bowl. Place the blade on the power shaft. Rotate the blade so it falls into place on the shaft. 5. Place the work bowl cover on the work bowl with the feed tube just to the left of the work bowl handle. Grasp the feed tube and turn the cover to the right until it locks into place. WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts.
Preparing the Food Processor for Use WARNING WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. Multipurpose Blade and Dough Blade Assembly Place the blade on the power shaft. Rotate the blade so it falls into place on the shaft. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 7.
Using the Food Processor Turning the Food Processor On and Off WARNING 1. To turn on the Food Processor, press the “I” Button. The Food Processor will run continuously and the indicator light will glow. Rotating Blade Hazard O | Always use food pusher. Pulse Keep fingers out of openings. Keep away from children. Failure to do so can result in amputation or cuts. 2. To stop the Food Processor, press the ”O” Button.
Using the Food Processor The 2-Piece Food Pusher To slice or shred small items, insert the 2-piece food pusher into the feed tube, turn the top of the pusher left or right to unlock the small pusher, and lift to remove. Use the small feed tube and pusher to process small or slender items, like single carrots or celery stalks. When not using the small feed tube, be sure to lock the small pusher into place.
Disassembling the Food Processor 5. The multipurpose blade can be removed from the work bowl before the contents are emptied. The blade can also be held in place as you remove food: grasp the work bowl from the bottom and place one finger through the center opening to grip the blade shaft. Then remove food from the bowl and blade with a spatula. WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. 1. Press the ”O” Button. 2. Unplug the Food Processor before Disassembling. 3.
Cleaning the Food Processor 5. To prevent damage to the interlock system, always store the work bowl and work bowl cover in the unlocked position when not in use. WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. 1. Press the ”O” Button. 2. Unplug the Food Processor before Cleaning. 3. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth. Dry with a soft cloth. Do not use abrasive cleansers or scouring pads. 4.
Troubleshooting – If the Food Processor still does not work, check the fuse or circuit breaker on the electrical circuit the Food Processor is connected to and make sure the circuit is closed. • If your Food Processor should fail to operate, check the following: – Make sure the work bowl and work bowl cover are properly locked on the base. – See if the Food Processor is plugged into a proper electrical outlet. If it is, unplug the Food Processor. Then plug into the same outlet again.
Food Processing Tips Using the Multipurpose Blade To chop cooked or raw meat, poultry or seafood: To chop fresh fruits or vegetables: The food should be very cold. Cut in 1-inch (2.5 cm) pieces. Process up to 1 pound (455 g) at a time to desired size, using short pulses, 1 to 2 seconds each time. Scrape sides of bowl, if necessary. Peel, core, and/or remove seeds. Cut food in 1 to 11⁄2-inch (2.5-3.75 cm) pieces. Process food to desired size, using short pulses, 1 to 2 seconds each time.
Helpful Hints 7. After removing the work bowl cover, place it upside down on the counter. This will help keep the counter clean. 8. To remove the contents of the work bowl without removing the multipurpose blade, grasp the work bowl from the bottom and place one finger through the center opening to hold the blade in place. Then remove food from the bowl and blade with a spatula. WARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. 1.
KitchenAid® Household Food Processor Warranty Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Australia and New Zealand: Three years Full Warranty from date of purchase on the Food Processor. Ten years Full Warranty from date of purchase on the motor. Replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center. A.
Service Centers All service should be handled locally by an Authorized KitchenAid Service Center. Contact the dealer from whom the unit was purchased to obtain the name of the nearest Authorized KitchenAid Service Center. In New Zealand: Peter McInnes NZ Ltd PO Box 303 Drury Aukland New Zealand Ph: 0800 881 200 Fax: 0800 881 300 In Australia: Peter McInnes Pty Ltd PO Box 323 HRMC NSW 2310 Australia Email: sales@petermcinnes.co.nz Website: www.kitchenaid.co.
How to Order Accessories and Replacement Parts To order accessories or replacement parts for your Food Processor in Australia: Peter McInnes Pty Ltd PO Box 323 HRMC NSW 2310 Australia To order accessories or replacement parts for your Food Processor in New Zealand: Peter McInnes NZ Ltd PO Box 303 Drury Aukland New Zealand Ph: 1800 990 990 Fax: 0249 026501 Ph: 0800 881 200 Fax: 0800 881 300 Email: sales@petermcinnes.com.au Email: sales@petermcinnes.co.nz Website: www.kitchenaid.com.au Website: www.
® Registered trademark of KitchenAid, U.S.A. ™ Trademark of KitchenAid, U.S.A., © 2008. All rights reserved.
