ARTISAN™-KOFFIEMOLEN GIDS VOOR HET BESTE RESULTAAT ARTISAN™ BURR GRINDER GUIDE TO EXPERT RESULTS LE BROYEUR À CAFÉ ARTISAN™ GUIDE DU CONNAISSEUR ARTISAN™ KAFFEEMÜHLE ANLEITUNG FÜR PROFESSIONELLE ERGEBNISSE MACINACAFFÈ ARTISAN™ GUIDA AI RISULTATI EXPERT MOLINO DE CAFÉ ARTISAN™ GUÍA PARA CONSEGUIR RESULTADOS PROFESIONALES ARTISAN™ BURR GRINDER GUIDE FÖR BÄSTA RESULTAT ARTISAN® KAFFEKVERN OPPNÅ BEST MULIG RESULTATER ARTISAN™ BURR GRINDER OPAS PARHAISIIN TULOKSIIN ARTISAN™ BURR GRINDER VEJLEDNING FOR E
Table of Contents Burr Grinder Safety ........................................................................................3 Important Safeguards ....................................................................................4 Electrical Requirements ..................................................................................5 Model 5KCG100 ............................................................................................6 Burr Grinder Features........................................
Burr Grinder Safety Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGER WARNING You can be killed or seriously injured if you don’t immediately follow instructions.
IMPORTANT SAFEGUARDS English When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against the risk of electric shock, do not put the Burr Grinder in water or other liquids. 3. Unplug the Burr Grinder from the outlet when not in use, before putting on or taking off parts, and before cleaning. 4. Avoid contacting moving parts. 5.
Electrical Requirements Volts: 220–240 Volts A.C. Hertz: 50/60 Hz NOTE: This Burr Grinder has a grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Extension cords are available and may be used if care is exercised in their use.
Model 5KCG100 English Bean Hopper Grind Level Ring Motor Housing Faceplate Screws Grind Control Dial Bin Seal Plate O/I Switch Coffee Bin Bin Platform Coffee Scoop Burr Cleaning Brush Model 5KCG100 Burr Grinder 6
Burr Grinder Features Motor Housing Die-cast metal housing is stable, durable, and easy to clean. Large 5.72 cm diameter flat cutting burrs provide long life and superb grind consistency. Burrs can be adjusted to compensate for wear, or calibrated to meet stringent grindsize specifications for espresso and French Press grinds. Bean Hopper 198 g capacity bean hopper unscrews from the motor housing for simple cleaning. Press-fit hopper lid makes for quick and easy filling.
Using the Artisan™ Burr Grinder 3. Fill the bean hopper to the level desired. At maximum, the hopper holds 198 g of beans. NOTE: This product is intended to grind whole coffee beans only. Before First Use English Before using the burr grinder, wipe the motor housing and cord with a clean damp cloth. Wash the bean hopper, hopper lid, and coffee bin in hot soapy water, then rinse and dry. The bean hopper, hopper lid, and coffee bin can also be washed in the top rack of a dishwasher.
Using the Artisan™ Burr Grinder 6. Select the grind by turning the grind control dial to the desired setting on the grind level ring. See the grind setting table below to match the grind level to your brewing process. With use, you’ll be able to refine the settings to match your own tastes. English 7. To grind coffee, flip the “O/I” Switch to the “I” position. 8.
Adjusting the Cutting Burrs English From the factory, the Artisan™ Burr Grinder will provide grinds suitable for almost all types of brewing. If you’re an espresso or French Press aficionado, however, you may wish to adjust the cutting burrs to provide optimum performance for your style of brewing. With adjustment, the Artisan™ Burr Grinder will easily meet stringent grind-size specifications for espresso (250 micron grind size) or French Press brewing (1500 micron grind size). 3.
Adjusting the Cutting Burrs 5. Rotate the grind control gear clockwise 1 “click” or detent at a time until you hear the burrs touching one another – when they touch, the burrs will make a distinct “rubbing” or grating sound. Adjusting for Maximum Grind Fineness English Adjusting the grinder to provide maximum fineness will slightly decrease the grind sizes throughout the grinding range. (To adjust the unit to provide coarser grinds, see page 10.) 1.
Burr Grinder Tips English 1. Select the correct grind for the brew process you are using. 15 grind levels are available in halfstep increments from 1 to 8. Level 8 produces a very fine grind perfect for espresso, 41⁄2 to 6 are medium grinds appropriate for automatic drip coffee makers, and 1 is a coarse grind suited to French Press brewing. Experiment – your tastes may be better served by using a slightly finer or coarser grind. 2.
The flavor of coffee depends on a variety of factors, including the quality, freshness, and roast of the beans, the purity of the brew water, the cleanliness of the brewing equipment, and the brewing temperature. The fineness and consistency of the grind is also critical. Coffee that is ground too fine for a particular brewing process – using a fine espresso grind in a drip coffee maker, for example – will result in the brew water of soluble compounds will be extracted from each.
Care and Cleaning 2. Using a flat-head screwdriver, turn the two faceplate screws counter-clockwise until the faceplate assembly is free. (The faceplate screws have retaining clips that prevent them from being removed from the faceplate assembly.) Cleaning the Motor Housing and Hoppers English • Make sure the burr grinder is switched to the “O” position and unplugged before cleaning. • Do not immerse the motor housing in water.
Care and Cleaning 5. After cleaning, tilt the burr grinder backward so the front of the motor housing faces upward. English 4. Using the burr-cleaning brush, clean the burr mounted on the burr-shaft assembly and the burr mounted within the motor housing. 6. With the corkscrew-shaped auger shaft facing into the motor housing, insert the burr-shaft assembly into the burr grinder. Keep the burr-shaft assembly level, so the tip of the auger shaft will line up with the small socket in the motor housing.
Care and Cleaning 7. Once the burr-shaft assembly is in the motor housing, rotate the assembly until it falls into place. When correctly positioned, the burr-shaft assembly cannot be rotated. 9. After the faceplate screws have been finger-tightened, use a flat-head screwdriver to tighten them until snug. 10. Place the burr grinder upright. It is now ready for use. English Adjusting The Cutting Burrs For Wear The cutting burrs are made of high-quality stainless steel for exceptional longevity.
Care and Cleaning 3. Remove the burr from the motor housing by turning the two burr-mounting screws counter-clockwise until free. Replacing the Cutting Burrs English If the cutting burrs are damaged, or have reached the end of their life (usually after grinding 270–360 kg of coffee), they can be replaced easily. Refer to “Service Centers” on page 19 to order a set of replacement burrs. To Replace the Burrs: 1. Remove the faceplate and burrshaft assemblies.
Troubleshooting Problems English If the grinder does not run when switched on: Check to see if the burr grinder is plugged into a grounded outlet. If it is, unplug the grinder, then plug it back in again. If the burr grinder still does not work, check the fuse or circuit breaker on the electrical circuit the grinder is connected to and make sure the circuit is closed. If the grinder does not run after taking these steps, a foreign object may be jamming the cutting burrs.
Length of Warranty: KitchenAid Will Pay For: KitchenAid Will Not Pay For: Europe, Australia and New Zealand: Two Year Full Warranty from date of purchase. Replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by an Authorized KitchenAid Service Center A. Repairs when Burr Grinder is used for operations other than normal household food preparation. Other: One Year Full Warranty from date of purchase. B.
Customer Service In U.K. & Ireland: Tollfree number 00800 38104026 Address: KitchenAid Europa, Inc. PO BOX 19 B-2018 ANTWERP 11 BELGIUM www.KitchenAid.com English ® FOR THE WAY IT’S MADE.™ ®Registered Trademark of KitchenAid, U.S.A. ™Trademark of KitchenAid, U.S.A. © 2005. All rights reserved. Specifications subject to change without notice.