Manual

(_perating Your Washer
Selecting a load size
Turn the Load Size Selector to the setting
that corresponds with the size of your wash
load and the type of fabric being washed.
See page 14 for loading suggestions.
To change the load size setting after the
washer has started to fill, turn the Selector to
the desired new setting.
NOTE: If you select the largest load size,
_j he washer fills to the highest waterlevel (near the top of the basket, not
to the top of the agitator).
Settings may vary with model
If your selector has RESET
To change the load size selection after the
washer starts filling, first move the Selector
to RESET, then to the new load size.
Selecting wash-rinse temperatures
Match the water temperature with the type of
fabric and soils being washed. The top
temperature is the wash water and the
bottom temperature isthe rinse water.
See pages 15 and 16 for water tempera-
ture guidelines.
Selecting a cycle and seffing
You will find information you need to help
you make correct cycle selections in this
section.
• Pages 7-9: Use the information on these
pages to guide you when selecting a wash
cycle and time.
• Page 10: Use this page to help you under-
stand what happens during a wash cycle.
Cycles may vary with model
6