Installation Instructions

Table Of Contents

Overlay Series Door Panel and Cabinetry Clearance

The custom door panels and adjacent cabinetry must be designed so that there is sufcient clearance for the doors to swing open. If

the refrigerator is to be installed close to the wall, see “Door Swing 90°” on next page.

1½"

(3.8 cm)

1¼"

(3.2 cm)

(2.5 cm)

1/2"

(1.3 cm)

3/4"

(1.9 cm)

(2.5 cm)

1¼"

(3.2 cm)

1½"

(3.8 cm)

1/4" (6.35 cm)

1/2" (1.3 cm)

3/4" (1.9 cm)

1" (2.5 cm)

When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.

NOTE: For Overlay Series models, rout the

hinge side of the custom door panels to a

radius that is equal to at least half the

thickness of the panel if a 130° door swing is

desired. See "Adjust Doors."

NOTE: Allow 1/2"

(1.3 cm) clearance

between overlay

panel and cabinetry.

Door Swing 110°

Actual Size

Refrigerator to

Cabinetry Clearance

Refrigerator

Side Trim

Cabinetry

Hinge

Spacer Panel

Overlay Panel

Baker Panel

Door