Installation Instructions

5
Stainless Steel Series (42" [106.7 cm] Models)
Features wraparound styling that complements the contoured
door handles. This series provides a warm commercial-looking
built-in refrigerator.
KBFN402ESS, KBFN502ESS
Black Stainless Steel Series (42" [106.7 cm] Models)
KBFN502EBS
Overlay Series (42" [106.7 cm] Models)
Features factory-installed, overlay style trim, to provide a
“frameless” look. This series requires the installation of custom
panels, handles, and standoffs.
KBFN402EPA, KBFN502EPA
INSTALLATION REQUIREMENTS
Tools and Parts
IMPORTANT:
■ Installer: Leave Installation Instructions with the homeowner.
■ Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the local
electrical inspector’s use.
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
■ Cordless drill ■ Torx
†
T15 and T27
screwdrivers
■ Drill bits ■ 11/32" nut driver
■ Adjustable wrenches (2) ■ 3/8", 1/4", and 1/2"
open-end wrenches
■ Phillips screwdriver ■ 5/32" hex key
■ Small level ■ 1/4" and 5/16" socket
drivers
■ Appliance dolly ■ Tape measure
■ Utility knife
Parts Needed
■ #8 x 3" (7.6 cm) wood screws
(longer screws may be needed) (6)
■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s) (1 or 2)
■ Make custom panels or consult a qualied cabinetmaker or
carpenter to make the panels.
Overlay Series: Make custom panels, or consult a qualied
cabinetmaker or carpenter to make the panels. See
“Installation Requirements” for more information.
Stainless Series and Black Stainless Series are shipped
complete.
■ If you are connecting the water line directly to copper tubing
and not to a shutoff valve, you need a ferrule, a union, and a
1/4" compression tting.
†
TORX is a trademark of Acument Intellectual Properties, LLC.