Installation Instructions
Table Of Contents
- REFRIGERATOR SAFETY
- MODELS
- INSTALLATION REQUIREMENTS
- Tools and Parts
- Location Requirements
- Electrical Requirements
- Water Supply Requirements
- Tipping Radius
- Product Dimensions
- Door Swing Dimensions
- Overlay Series Door Panel and Cabinetry Clearance
- Custom Overlay Panel Dimensions
- Overlay Series Custom Panels
- Stainless Steel and Overlay Series Both 36" and 42" models have the same cabinet side trim
- INSTALLATION INSTRUCTIONS
- Unpack the Refrigerator
- Reduce Tipping Radius (if required)
- Move the Refrigerator into House
- Install Anti-Tip Boards
- Connect the Water Supply
- Plug in Refrigerator
- Move Refrigerator to Final Location
- Level and Align Refrigerator
- Install Overlay Custom Panels
- Adjust Door(s)
- Install Side Panel
- Install Base Grille
- Complete Installation
- SÉCURITÉ DU RÉFRIGÉRATEUR
- MODÈLES
- EXIGENCES D’INSTALLATION
- Outils et pièces
- Exigences d’emplacement
- Spécifications électriques
- Spécifications de l’alimentation en eau
- Rayon de basculement
- Dimensions du produit
- Dimensions pour l’ouverture des portes
- Dégagement des panneaux de porte de série Overlay et des armoires
- Panneaux personnalisés de série Overlay
- Dimensions des panneaux personnalisés
- Les modèles de série Overlay et en acier inoxydable de 36" et 42" sont dotés de la même garniture latérale de caisse
- INSTRUCTIONS D’INSTALLATION
- Déballage du réfrigérateur
- Réduire le rayon de basculement (le cas échéant)
- Déplacement du réfrigérateur dans le domicile
- Installation de planches antibasculement
- Raccordement à la canalisation d’eau
- Brancher le réfrigérateur
- Déplacement du réfrigérateur à son emplacement définitif
- Réglage de l’aplomb et alignement du réfrigérateur
- Installation des panneaux personnalisés Overlay
- Ajustement des portes
- Installation du panneau latéral
- Installation de la grille de la base
- Terminer l’installation
13
Overlay Series Custom Panels
Custom overlay panels allow you to blend the exterior of your
refrigerator into the overall kitchen decor and to use custom
handles for additional design exibility.
The custom panels must have backer panels attached in order to
mount them to the refrigerator. It is most common to work with
three panels, as shown in the following graphic: a decorative
overlay panel, a 1/8" (0.32 cm) spacer panel or spacer strips and a
1/4" (0.64 cm) backer panel.
In some cases, your cabinet manufacturer may choose to work
with one panel routed for the different dimensions. Follow these
panel dimension and placement instructions to be sure that the
custom overlay panels will t properly.
IMPORTANT:
■ For 36" (91.4 cm) single-door models, the refrigerator door
overlay panel cannot exceed 50 lbs (23 kg) and the freezer
drawer overlay panel cannot exceed 20 lbs (9.1 kg).
■ For 36" (91.4 cm) and 42" (106.7 cm) French-door models, the
refrigerator door overlay panel cannot exceed 30 lbs (13.5 kg)
and the freezer drawer overlay panel cannot exceed 25 lbs
(11.4 kg).
■ The weight of the top grille overlay panel cannot exceed
10 lbs (4.5 kg) for both models.
To minimize panel weight, you may use 2" (5.08 cm) spacer strips
around the perimeter in place of full-sheet solid spacer panels.
The spacer strips must be set in at least 1" (2.54 cm) from the
top, bottom and side edges of the backer panel. If you use spacer
strips, it is also recommended that you use two 2" (5.08 cm) strips
horizontally centered for added support.
Overlay Panel
Spacer Panel
Spacer Panel
(6.35 mm)
(3.18 mm)
(3.18 mm)
1" minimum
(2.54 cm)
(15.88 to
19.05 mm)
Backer
Panel
5/8" to 3/4"
1/8"
1/8"
1/4"
Overlay Panel
Door/Grille Trim
Backer Panel
Offset Dimension
Custom Overlay Panel Dimensions
Custom Overlay Panels
(36" [91.4 cm] Single Door Models)
Custom Backer Panels
(36" [91.4 cm] Single Door Models)
34
3
/4"
(88.27 cm)
33
3
/4"
(85.73 cm)
49
1
/8"
(124.78 cm)
20
3
/16"
(51.28 cm)
34
3
/4"
(88.27 cm)
34
3
/4"
(88.27 cm)
34
1
/4"
(87.00 cm)
34
1
/4"
(87.00 cm)
REFRIGERATOR DOOR PANEL
Maximum Weight: 50 lbs (23 kg)
FREEZER DOOR PANEL
Maximum Weight: 20 lbs (9.1 kg)
51
1
/8"
(129.86 cm)
7
1
/4"
(18.42 cm)
6
3
/16"
(15.72 cm)
TOP GRILLE PANEL
Maximum Weight: 10 lbs (4.5 kg)
Center Backer
Panel left to right
Center Backer
Panel left to right
Center Backer
Panel left to right
20
3
/4"
(52.71 cm)
Bottom Offset
3/8" (9.5 mm)
Bottom Offset
7/16" (11.1 mm)
Bottom Offset
1/4" (6.35 mm)