Insert Sheet
SAVE THESE INSTRUCTIONS
BEFORE YOU CALL FOR SERVICE
These helpful hints address frequently asked questions. For detailed information see your Use and Care Guide and Installation
Guide.
• Please read the entire Use and Care Guide and Installation Guide to become aware of important safety instructions and to become familiar with your
new refrigerator.
• Send your registration card to register your refrigerator.
NO ICE AND/OR WATER DISPENSE
• Make sure that the cold water supply is connected and turned ON.
• For SxS models with external dispenser make sure that the ice
maker in turned ON.
• For non-dispenser models make sure that wire shutoff arm is in
ON position (arm down).
• For ice makers with a switch, use the switch to turn ON or OFF the
ice maker.
With switch Without switch
LEAKING WATER
If you notice water leaking from underneath the unit please check
connection of your water supply to the refrigerator water tubing.
UNEVEN DOORS
Door leveling is part of the installation process. If doors are uneven,
please contact the dealer/installer and have them return to correct
the installation issue.
UNIT NOT LEVELED
Leveling the unit is part of the installation process. If there is an
issue, please contact the dealer/installer and have them return to
correct the installation issue.
COMPRESSOR NOISE
Your new refrigerator is equipped with an energy efcient variable
speed compressor. It is normal for this compressor to change
sounds as it changes speeds. When rst plugged in, or after being
loaded with warm food, it will run at a high speed.
DOOR OR HANDLE DAMAGE
If you purchased an overlay model (with custom panels, handles
and standoffs) in case of damages you should contact the
dealer/installer and have them return to correct the installation
issue.
A
B
C
D
E
F
G
A. Household water line
B. Nut (purchased)
C. Ferrule (purchased)
D. Coupling
E. Bulb
F. Nut
G. Refrigerator water tubing
IF YOU ARE DISSATISFIED WITH THE INSTALLATION, PLEASE CALL THE STORE WHERE PURCHASED.
1