Manual

ii,"_,!'icrowave Cooking
4. When display says "TIME,"
touch MICRO to set second
cycle.
!i¸ _z_iii_illii ii
f MicRo1
• ° COOK
5. Set cooking time for second
cycle.
Example for 3 minutes, 25 seconds:
,ii i::
NOTES:
• If you want to add more time during
cooking, use EASY MINUTE. See
"Using EASY MINUTE" section for more
information.
• During any Micro cooking stage, you
can change the cooking time after
touching START. Simply touch MICRO
and enter the new cooking time within
5 seconds.
When cooking time ends, four tones will
sound, and the display will show "End".
9. After cooking, open the door
OR
6. Set cook power for second
cycle (optional).
If you want to cook at full (100%) cook
power, go to Step 8.
Example for 60% cook power:
Four tones will repeat every minute until
you open the oven door or touch
CANCEL. This will clear the display.
Your ULTIMA COOK TM oven automatically
reheats food. You do not have to enter times
or temperatures.
7. Repeat Steps 4 to 6 above for
third cycle (optional).
8. TOUCH
(display counts
down cooking time
in each cycle, start-
ing with first cycle)
NOTE: If you want to manually reheat using
a cook time and cook power, see "Reheating
chart" in the "Cooking Guides" section.
Summary of steps for setting
CUSTOM REHEAT
1. Touch CUSTOM REHEAT.
2. Touch CUSTOM REHEAT again
to scan and select reheat food
settings.
One short tone will sound between cycles.
3. Touch QUANTITY to scan and
select available quantity
settings.
continued on next page
25