Installation Instructions

10
Overlay Series Door Panel and Cabinetry Clearance
The custom door panels and adjacent cabinetry must be designed so that there is sufcient clearance for the doors to swing open. If the
refrigerator is to be installed close to the wall, see “Door Swing 90°” on next page.
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
Door Swing 110°
Actual Size
Refrigerator to
Cabinetry Clearance
Refrigerator
Side Trim
Cabinetry
Spacer Panel
Overlay Panel
Backer Panel
Door
Hinge
1
1
⁄2"
(3.8 cm)
1
1
⁄2"
(3.8 cm)
1/4"
(6.35 mm)
1/2"
(1.3 cm)
1/2"
(1.3 cm)
3/4"
(1.9 cm)
3/4"
(1.9 cm)
1"
(2.5 cm)
1"
(2.5 cm)
1
1
⁄4"
(3.2 cm)
1
1
⁄4"
(3.2 cm)
1"
(2.5 cm)
NOTE: Allow
1/2" (1.3 cm) clearance
between overlay panel
and cabinetry.
NOTE: For Overlay Series models, rout
the hinge side of the custom door panels
to a radius that is equal to at least half the
thickness of the panel if a 130° door swing
is desired. See “Adjust Doors.”