Setup and user guide

7
Cleaning
Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect
the electrical power supply.
Never use abrasives. Never clean refrigerator parts with ammable uids.
Do not use steam cleaners.
The buttons and control panel display must not be cleaned with alcohol or alcohol-derived
substances, but with a dry cloth.
Clean the appliance occasionally with a cloth and a solution of warm
water and neutral cleaning agents specically for cleaning the inside of
the refrigerator.
To ensure the constant and correct ow of the defrosting water, regularly
clean the inside of the drain situated in the back wall of the refrigerator
compartment near the fruit and vegetable drawer using the utensil
provided.
Troubleshooting
Before contacting the Customer Service Center:
1. Restart the appliance to be sure that the problem hasn’t been resolved. If necessary, repeat the
operation after one hour.
2. Carry out the checks outlined in the Troubleshooting section of the Instructions for Use Manual
or at www.kitchenaid.eu, then switch the appliance back on.
If the problem persists, contact your nearest Customer Service Center.
You will need to describe the problem to the technician and provide the precise type and model
of your appliance, as well as the Assistance Code found on the data plate inside the refrigerator
compartment. This information will enable the technician to immediately identify the type of
intervention required.
If a repair is required, we suggest you refer to an Authorised Technical Service Center.
Please refer to our website www.kitchenaid.eu for complete instructions for use.
In addition, you will nd a lot more useful information about your products, such as inspiring
recipes created and tested by our brand ambassadors or the nearest KitchenAid cookery school.