Operating instructions and installation manual
Important safety instructions 4 Safeguarding the environment 5 Electrical connection for Great Britain and Ireland only 5 Energy-saving tips 6 Before using the appliance 6 Precautions and general recommendations 6 Cleaning, sanitization and maintenance of the ice and/or water dispenser (if present) 7 Installation requirements 8 Technical specifications 9 Installation 9 Foreword 14 First use 15 Troubleshooting guide 17 After-sales service 18
Important safety instructions Original instructions are the ones in English language. All other instructions in different languages have been translated from the original version. •WARNING: to avoid a hazard due to instability, positioning or fixing of the appliance must be done in accordance with the manufacturer instructions. •WARNING: keep the appliance ventilation openings clear of obstruction. •WARNING: do not damage the appliance refrigerant circuit pipes.
Safeguarding the environment 1. Packing The packing material is 100% recyclable and bears the recycling symbol . For disposal, comply with the local regulations. Keep the packing materials (plastic bags, polystyrene parts, etc.) out of the reach of children, as they are a potential source of danger.
Energy-saving tips • Install the appliance in a dry, well ventilated room far away from any heat source (e.g. radiator, cooker, etc.) and in a place not exposed directly to the sun. If required, use an insulating plate. • To guarantee adequate ventilation follow installation instructions. Before using the appliance To ensure best use of your appliance, carefully read the operating instructions which contain a description of the product and useful advice. Keep these instructions for future reference. 2.
Cleaning, sanitization and maintenance of the ice and/or water dispenser (if present) Failure to follow the instructions regarding sanitizing can compromise the hygienic safety of the water dispensed. • With each filter replacement, sanitise the ice and/ or water distribution system using a food grade disinfectant (with sodium hypochlorite), which does not alter the characteristics of the materials, or use the “Sanitising Kit” available from the After-Sales Service.
Installation requirements Location zone conditions The ice maker machines are designed to operate at room temperature between 5ºC (41ºF) and 43ºC (109.40ºF). Housing dimensions To install the ice maker in the correct way, it will be necessary that the hole located for such effect in the piece of furniture has the dimensions established in the drawing (560x440x560 mm). The drainage must be in the position indicated in the drawing. In the left part of the housing and below the inferior level of the machine.
Technical specifications - Sizes External: 596x455x538 Cabinet hole size: 560x440x560 - Mounting on sliding rails. - Production: Rated production: 10 Kg/24h (Ambient temperature 20°C / Water temperature 15°C). - 12 cubes/cycle - ice cube weight 22 g - Ice tank: 8 Kg - Power supply connection: - Power supply: 220 V / 50 Hz. - Power: 250 W - Intensity: 1.8 A - Water connection - Male thread tap socket ¾” BSP - Consumption: 2.
60mm 60mm 100mm 560mm 440mm 560mm 560mm 10
200mm 3,5mm 5mm 10mm mm m 11
Electric Socker (SCHUCO) Water Network 3/4” Water Drainage Free zone for machine passage BACK OF ICE MAKER BACK OF ICE MAKER BACK OF ICE MAKER BACK OF ICE MAKER 12
Connections to the Water Network Use the flexible pipe with the two filter joints supplied with the machine. Pressure should be between 1 and 5 Bar. If pressures overpass such values, install the necessary corrective devices. Leave free the needed length to extract the machine up to the end of the guides. The rest can be flanged and gathered at a side to avoid that when storing the machine it can touch the water pump and stop it or make noise.
Foreword -- The appliance requires connection to the water supply for filling with drinkable water, and a drainage outlet for any residual cycle water. -- The appliance has a cyclical operation: the production cycle continues until the container is full; a thermostat below the ice output automatically stops the appliance when the tank is full. -- When the quantity of ice falls below a certain level, due to use or melting, the same thermostat will reactivate the appliance.
First use Settings Warning: before opening the settings menu ensure that the appliance is off. The following parameters can be set TIME PROGRAMMING OF THE APPLIANCE NUMBER OF ICE CUBES ICE CUBE SIZE LANGUAGE Setting the time et the desired time using the program selection arrow (the hours will flash first, followed by the minutes) and confirm the selection at each stage using the OK key.
Startup The appliance is configured at the factory with preset values. Warning: in case of power cut setting parameters are conserved. Only hour and timer programmer are lost because pcb board has no battery Before switching the appliance off, a thorough cleaning is necessary, following the instructions of the “Maintenance and cleaning” section. -- Insert the plug in the electric socket. -- Press the ON key for a few seconds.
Troubleshooting guide If the appliance does not operate correctly, or does not operate at all, before contacting customer care refer to the following alarm table: Alarm Probable cause Verification Full tank Bin Machine is stopped Thermostat failure In the storage bin the ice cubes do not touch the thermostat rod Cycle probe.
After-sales service Before contacting the After-sales Service: 1. Ensure that you are unable to resolve the fault. 2. Switch the appliance on again to see if the problem has been solved. If it has not, disconnect the appliance from the power supply and wait for about an hour before switching on again. 3. f the problem persists contact After-sales Service.
Printed in Italy r 11/18 400011324317 EN
