Troubleshooting guide

13
Description and use of hood
1. Hood body
2. Extraction panel
3. Cylindrical actuator
4. Switch
5. IR sensor
6. Lighting
7. Grease filters
8. LED indicators
9. Anchoring to ceiling.
The hood functions and the external motor performance can be controlled in two alternative ways by
means of the remote control or the switch on the main body of the hood.
Operation using the remote control
The 2010 remote control model has six control buttons.
• Button 1:
Switches the hood on or off. When the hood is switched on, the external
motor is set to extraction power 1.
• Button 2:
Increases the extraction power (1→2→3).
The speed is displayed by lighting up of the LED of the corresponding
speed.
Button 2 has no effect on hood deactivation/activation.
• Button 3:
Decreases the extraction power (3→2→1).
The speed is displayed by lighting up of the LED of the corresponding
speed.
Button 3 has no effect on hood deactivation/activation.
• Button 4:
Activates timed hood deactivation. This function provides for a speed
decrease from power level 3 to level 1, maintained for 15 minutes before
the hood switches off. During timed operation, the corresponding LED
blinks.
• Button 5:
Increases the extraction power to maximum, and then automatically
returns to power level 3 after 5 minutes.
The speed is displayed by lighting up of the LED of the corresponding
speed.
• Button 6:
Switches the light on or off. The light intensity becomes adjustable by
keeping Button 6 pressed longer.