Owner's Manual

4 | USING THE BURR GRINDER
BURR GRINDER SAFETY
ELECTRICAL REQUIREMENTS
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
WARNING
Voltage: 120 V
Frequency: 60 Hz
Wattage: 220 W
NOTE: This Burr Grinder has a 3 prong
grounded plug. To reduce the risk of
electrical shock, the plug will fit in an
outlet only one way. If the plug does
not fit in the outlet, contact a qualified
electrician. Do not modify the plug in any
way.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or service technician
install an outlet near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to
reduce the risk resulting from becoming
entangled in or tripping over a longer
cord.
NOTE: The bean hopper holds a maximum of 7 oz (200 gm) of beans.
HELPFUL TIP: Because partially ground coffee beans may remain between the burrs
after the Burr Grinder is turned off, it is recommended to select a finer grind setting
while the Burr Grinder is running.
This Burr Grinder offers 15 different grind levels, available in half-step increments
from 1 to 8. Select the grind by turning the grind control dial to the desired setting
on the grind settings ring, as shown in this chart. With continued use, you will be
able to refine the setting to match your own tastes.
GRIND SETTING CHART
USING THE BURR GRINDER
Grind Coffee Type Setting
Coarse French Press 1-3
Medium-Coarse Siphon 3-5
Medium Automatic Drip 5-6
Medium-Fine Pour Over 6-7
Fine Espresso 8
W11381672A.indb 4 8/21/2019 4:41:52 PM