Owner's Manual

ENGLISH

USING THE BURR GRINDER | 7

USING THE BURR GRINDER

ADJUSTING THE BURRS FOR A FINER OR COARSER GRIND

If you’re an espresso or French Press aﬁcionado, you may wish to adjust the factory

setting of the cutting burrs to provide optimum performance for your style of brewing.

FOR DETAILED INFORMATION ON USING THE BURR GRINDER:

Visit www.kitchenaid.com/quickstart for additional Instructions with videos, inspiring

recipes, and tips on how to use your Burr Grinder.

NOTE: If you cannot get the exact

maximum coarseness of grind you prefer

by adjusting the Burr Grinder while it is

off, try adjusting with the Burr Grinder

turned on.

Make sure the bean hopper is

empty; then, flip the POWER switch

up to turn on and run for a few

seconds to clear any debris.

For maximum grind fineness: Turn

the grind control dial to level 8.

For maximum grind coarseness:

Turn the grind control dial to level 1.

Using a 5/32 in (4mm) allen wrench

or a hex-head screwdriver, remove

the screw from the front of the

grind control dial by turning it

counterclockwise. You will be able to

see the grind control gear after the

dial is removed.

For maximum grind fineness: Flip

the POWER switch up to turn on the

Burr Grinder.

For maximum grind coarseness:

You do not need to turn the Burr

Grinder on while adjusting the burrs.

W11381672A.indb 7 8/21/2019 4:41:53 PM