Owner's Manual

ENGLISH
CARE AND CLEANING | 9
CARE AND CLEANING
IMPORTANT: To avoid damage, never wash or immerse the Burr Grinder main body,
cutting burrs, burr-shaft assembly, or faceplate in water, or place in the dishwasher.
CLEANING THE BURR GRINDER AND BURRS
FOR DETAILED INFORMATION ON CLEANING THE BURR GRINDER:
Visit www.kitchenaid.com/quickstart for additional Instructions with videos, inspiring
recipes, and tips on how to use your Burr Grinder.
IMPORTANT: If the Burr Grinder is used frequently, the burrs should be cleaned
regularly for best performance. Cleaning enables the burrs to achieve the finest,
most consistent grinds possible.
1
After using the Burr Grinder, remove
the bean hopper, lid, and grind jar.
Wash these pieces by hand with
a soft cloth, in warm sudsy water;
or, wash in the top rack of the
dishwasher.
2
Clean the Burr Grinder main body
and all its parts by hand only.
Wash with a soft, damp cloth. Dry
thoroughly with a soft dry cloth. Do
not wash in the dishwasher. Do not
immerse in water.
3
Remove the faceplate assembly by
loosening the screws on either side.
Screws can be loosened by hand.
4
Pull the burr-shaft assembly out
to clean with the other parts. Using
the burr-cleaning brush, clean the
burr mounted on the burr-shaft
assembly and the burr mounted
in the motor housing.
W11381672A.indb 9 8/21/2019 4:41:54 PM