Use and Care Manual

ENGLISH
CARE AND CLEANING | 9
CARE AND CLEANING
IMPORTANT: To avoid damage, never wash or immerse the Burr Grinder main body,
cutting burrs, burr-shaft assembly, or faceplate in water, or place in the dishwasher.
The bean hopper and lid, and grind jar are dishwasher safe, top rack only.
CLEANING THE BURR GRINDER AND BURRS
FOR DETAILED INFORMATION ON CLEANING THE BURR GRINDER:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Burr Grinder.
IMPORTANT: If the Burr Grinder is used frequently, the burrs should be cleaned
regularly for best performance. Cleaning enables the burrs to achieve the nest,
most consistent grinds possible.
1
After using the Burr Grinder, remove
the bean hopper, lid, and grind jar.
Wash these pieces by hand with
a soft cloth, in warm sudsy water;
or, wash in the top rack of the
dishwasher.
2
Clean the Burr Grinder main body
and all its parts by hand only.
Wash with a soft, damp cloth. Dry
thoroughly with a soft dry cloth. Do
not wash in the dishwasher. Do not
immerse in water.
3
Remove the faceplate assembly by
loosening the screws on either side.
Screws can be loosened by hand.
4
Pull the burr-shaft assembly out
to clean with the other parts. Using
the burr-cleaning brush, clean the
burr mounted on the burr-shaft
assembly and the burr mounted
in the motor housing.
W10779357C_ENv09.indd 9 1/11/16 3:01 PM