Dimension Guide
8 of 24
COMMERCIAL-STYLE RANGETOPS
DIMENSIONS
IMPORTANT: Dimensional specications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All KitchenAid
®
appliances are appropriately UL, CUL or CSA approved.
GAS REQUIREMENTS
RECOMMENDED GAS SUPPLY LOCATION GAS SUPPLY ZONE
TOP VIEW
FRONT VIEW
*If the back wall is constructed of a combustible material and a backsplash is not installed, a 7
1
⁄
2
" (19.1 cm) minimum clearance is
required from the cutout or 6" (15.2 cm) minimum clearance from the back edge of the rangetop.
**Unlike many cooktops, these models do not hang from the side anges, but rather sit on the oor of the cutout. The grey box
pictured in the image above on the left is a hole in the cutout for the gas and electric lines to pass through.
NOTE: If you have questions about your gas supply, call a licensed, qualied service technician.
e
*
1³/₄" (4.4 cm) min. to 7³/₄" (19.7 cm) depending
on combustible backsplash.
³/₄" (1.9 cm)
6⁷/₈" (17.5 cm)
12¹/₂" (31.7 cm)
2"
(5.1 cm)
Gas Supply
Zone
14" (35.6 cm)
Wall
W11255638C