Operation Manual

T recirculation

mode

SIDE VIEW

Deflector

Connection

ring

Exhaust

Vent

Pipe

Recirculation mode only

Fig. 4

• Recirculation mode only: fix the deflector to the

frame:

a. Insert the deflector from one side of the

frame so that the rectangular hole at the centre

is facing downwards.

b. Fit the deflector with 4 screws from the top

of the frame.

c. Connect a suitable extraction pipe to the

connection ring provided. It should be long

enough ( with a diameter of 150mm) to reach

the connection ring on the motor unit when it is

installed. Use the mathematical formula in the

diagram to do this.

d. Insert the pipe with the connection ring

upwards and fix it to the deflector with 2 screws.

Installation