Coffeemaker User Manual

12
COFFEE MAKER ENHANCED FEATURES
Pause and Pour Feature
The “Pause and Pour” feature enables you
to remove the carafe from the coffee maker
and pour a cup of coffee before brewing is
finished. When the carafe is removed, a
special valve stops the flow of coffee from
the brew basket. However, brewing does
not stop. If the carafe is not placed back in
the coffee maker within 15 seconds, water
and coffee grounds will overflow the brew
basket.
Automatic Brew Timer
The coffee maker can be programmed to
brew coffee at a preset time, making it easy
to wake up to fresh coffee every morning. To
program and activate the Automatic Brew
Timer:
1. Press the AUTO SET button to enter the
Auto Brew setting mode. The “Hours”
indicator will flash and the “Auto Set”
indicator will turn on and stay on during
the Auto Brew programming cycle.
2. Press the “up arrow” button to increase
the hours. Holding this button increases
the time faster.
3. Press the AUTO SET button. The
“Minutes” indicator will flash. Press the
“up arrow” button to increase the
minutes. Holding this button increases
the time faster.
4. Press the AUTO SET button. The “AM/
PM” indicator will flash. Press the “up
arrow” button to switch between AM
and PM.
5. Press the AUTO SET button to exit
programming the Auto Brew setting. The
“Auto Set” indicator will turn off.
Brew Strength
The coffee maker can be programmed to
brew coffee at bold (BOLD) strengths (the
default brew strength is regular).
To program and activate the “Bold” mode
setting:
1. Press the BOLD button to select the
“Bold” indicator.
NOTE: Once “Bold” is selected, it
remains on until it is turned off.
Immediate Brew
1. Press the BREW button 1 time. The
coffee maker will beep, and the Brew
button light will turn on. Once the brew
cycle is complete, the coffee maker will
beep 3 times.
NOTE: The warming plate is
automatically turned on during the brew
cycle.
2. If desired, press the BREW button after
the brew cycle is complete to turn off
the warming plate. The Brew button light
will turn off.
Auto Brew
1. Press and hold the BREW button. The
“Auto” indicator will turn on and the
brew button will flash until the coffee
maker begins brewing. Once the set
brew time is reached, the “Brew” button
light will turn on and the coffee maker
will beep.
NOTE: The warming plate is
automatically turned on during the brew
cycle.
2. If desired, press the BREW button after
the brew cycle is complete to turn off
the warming plate. The Brew button light
will turn off.