Installation guide

INSTALLATION INSTRUCTIONS
Ss
es
Tools and Pars
EG
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
a Drill
a 7/64" drill bit
m Measuring tape
m= Pencil
gm Phillips screwdriver
Parts Supplied (not shown to scale
Bottom duct Trim kit frame Rails (2)
aaa
tna)
iN
2
Long wood screws (6 - painted)
(4 + 2 extra)
Short screws (14)
(11 + 3 extra)
eyes, may leap cya
Location Requirements
The microwave oven may be installed over a built-in oven. If
installing over a built-in oven, make sure there is a minimum of 3”
(7.6 cm) between the top of the lower oven cutout and the
microwave oven cutout floor.
The microwave oven may also be installed in a cabinet by itself
(without a built-in oven below). For best usability, we recommend
a minimum distance of 36" (91.4 cm) from the floor to the cutout
floor.
Make sure the surrounding cabinetry has clearance to open and
close freely. Allow a clearance of at least 1%." (4.0 cm) below the
cutout floor (3" [7.6 cm] for installation above a built-in oven), and
a clearance of at least 2" (5.1 cm) above the cutout opening.
' q | Oo] jo = A —- 0 oO ty
e
ont
|
A.
cm)
1%."
4
i}
.
(4.0
cm)
i
Fo
oan
0}
}
Cc
D
mmo
@ite
im
D. Lower cabinets
E. Floor
A. Upper cabinet
B. Microwave oven cutout
C. Lower oven cutout
Required
22 Ys"
(667.8em) “Toes
a“ -
( I .
17" (43.2 cm %
(nine
a
pA
17 Ve" (43.5 cm) ——j f/f
max. af
3" Vie"
2.7 cm
(7.6 cmt ( )
—B
A. Trim kit frame overhang
B. Cutout for lower oven
NOTES:
mg Height dimension is critical: 17° (43.2 cm) minimum, 1714"
(43.5 cm) maximum.
m Width and depth measurements have +1/16" (2 mm)
tolerance.
gm 3" (7.6 cm) minimum dimension is from lower oven cutout
ceiling to microwave oven cutout floor.
gm Trim kit frame extends 1%s6" (2.7 cm) above and below the
cutout opening.
Trim Kit Frame Dimensions
| 26 Y" (68.2 cm)*
———<$<$<____—-
29 4" (75.6 m)**
<— 22 ¥4" (57.8 cm)
19 Ve"
(48.6 cm)
2 tse" (5.2 em)*
3 V2" (8.9 cm)**
1 %e" (3.0 cm)
*27" (68.6 cm) trim kit
**30" (76.2 cm) trim kit