Installation guide

3. Align the center arrows on the bottom duct with the centerline
drawn in Step 1 above.
install the Microwave Oven
1. Gently return microwave oven to its upright position.
2. Position microwave oven near cutout opening.
i
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
A. Bottom duct
Do not use an extension cord.
B. Center arrows, aligned with centerline
Failure to follow these instructions can result in death,
4. Mark the three mounting holes through the bottom duct onto fire, or electrical shock.
the cutout floor.
3. Plug in microwave oven.
4. Align the rails with the rail guides on the bottom duct.
A
w/
A. Short screws (3)
B. Bottom duct mounting holes
Sorter
enna,
Using 7/64" drill, drill pilot holes into the three holes marked in
Step 4.
Realign and install the bottom duct with three short screws.
soon BB
Using 7/64" drill, drill pilot holes through the four mounting
holes of the bottom duct flange into the bottom front facing of A. Rail guides
the
cutout/cabinet
opening.
B.
Rails
A. Bottom duct flange
B. Mounting holes