Owner's Manual

16 |
TROUBLESHOOTING GUIDE
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Problem Solution
If the oven fails to start:
Check to see if the oven is plugged into a grounded 3
prong outlet.
Check to see if the fuse in the circuit breaker box to the
oven is in working order.
If the problem cannot be
corrected:
See the “KitchenAid
®
Warranty and Service” sections.
Do not return the Air Fryer to the retailer – retailers do not
provide service.
If the wrong temperature unit is
displayed:
Press and hold the Convection button for 3 seconds
to switch between Fahrenheit (°F) and Celsius (°C)
temperature units.
Upper cooking elements visibly
glow, but bottom cooking
elements do not:
The upper cooking elements use higher power for better
browning performance. The lower cooking elements
are on, but may not visibly glow like the upper cooking
elements. This is normal and your Air Fryer is working
properly.
If “E1 or E2” flashes on the
display and a chime sounds:
The NTC Sensor may not be working. This issue can not
be corrected. Please see the “KitchenAid
®
Warranty and
Service” sections.
If “PF” is shown on the display:
The oven will display “PF” when it is powered up for the
first time, or has experienced a power failure. If a cooking
function was in process, dispose of food; it might not be
thoroughly cooked.
W11407666B.indb 16W11407666B.indb 16 3/30/2020 6:38:27 PM3/30/2020 6:38:27 PM