Operation Manual

Fig. 2

• Attach the perforation layout to the wall (5).

• Attach the 2 brackets to the wall using 2 screws

and 2 plugs (6) for each one.

• Hang the hood on the brackets (7).

• Adjust the distance (8) and horizontal position (9)

of the hood, using the specific screws.

• From inside and, from the outside of the hood,

mark the holes for the final fitting (10).

Note: see layout of the back of the hood with

the final position of the holes/plugs/screws

(Fig. 2.1).

• Remove the hood (11).

• Make the holes and insert the plugs in the

previously marked points (12).

• Assemble the bracket for the chimney flue using

the 4 screws supplied (13).

Note: the extension of the chimney flue bracket

must be identical to the internal width of the

chimney flue. Attach the bracket to the wall with

2 plugs and 2 screws (14).

• Hang the hood again on the brackets (15).

• Fit the hood securely (16).

Note: see assembly operations 10-12 for the

number and position of the screws.

Installation