Installation Instructions

WATER CONNECTION
Recommended COLD (Maximum 60°C).
3/4 “ BSP (GB20) to suit flat washer.
WATER SOFTENER MODELS
Refer to your User Guide on vhow to set up your water softener.
WATER PRESSURE
Maximum Minimum
Water Softener Models 1000kPa (145 p.s.i.) 100kPa (14,5 p.s.i.)
Other Models 1000kPa (145 p.s.i.) 30kPa (4,3 p.s.i.)
DRAIN CONNECTION
Drain Hose Joiner to suit Ø19mm ± 2mm waste tee.
ELECTRICAL CONNECTION
220-240 VAC power outlet
4.5Amps Minimum.
Prefinsished model shown
*For an Integrated the product depth is specified with an 18mm Integrated Panel thickness.
** Depth of product excludes Curvature (30mm), or Handle.
LENGTH OF SERVICES (FROM PRODUCT EXIT POINT)
Drain hose - 2250mm
Inlet hose - 1750mm
Power supply cord - 1965mm
NOTE: Services approximately exit product 189mm from left; 550mm from front; 393mm from top.
R
Service specifications - single models
*
Side View
Drawer Open
Tabs
11
5019_102_00273_INSTAL_GB 30-05-2007 13:25 Pagina 11