Installation Instructions

1. Read these instructions completely and carefully.

2. Installation of this requires basic mechanical and electrical skills.

3. Be sure to leave these Instructions with the Customer.

4. At the completion of the installation, the Installer must perform Final Check List as per

Section 11 of these Installation Instructions.

5. Remove all packaging materials supplied with the .

Note to the installer

Keep these Installation Instructions with your User Guide for future reference. must be securely

anchored before it is operated.

WARNING!

Before installing the , remove the house fuse or open the circuit breaker. Ensure all

water connections are turned OFF. It is the responsibility of the plumber and electrician to ensu-

re that each installation complies with all Codes and Regulations.

Important!

These instructions must be followed precisely to ensure correct venting and operation of the

. In the event of a fault related to the incorrect installation, the installer will be liable

for any repairs.

Important!

The MUST be installed to allow for future removal from the enclosure if service is requi-

red.

Important!

Improper installation is not covered under the Warranty.

Important!

If the is to be relocated from one installation to another it must be kept upright to

avoid damage from water spillage.

Note to the customer

5019_102_00273_INSTAL_GB 30-05-2007 13:25 Pagina 4