Use and Care Guide

9
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED
TIME TO
CYCLE
ADDED
WATER
GALLONS
(LITERS)
Hi-Temp
Wash
Sound on/off
Hold 3 Sec
Raises the main wash temperature to
improve cleaning for loads containing
tough, baked-on food.
ProWash™
Normal
Raises the main
wash temperate up
to 135°F (57°C).
0:00 to
0:30
1.2 to 6.2
(4.8 to 23.3)
Extended
Heat Dry
Heat Dry
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn
the Heat Dry option off for an air dry.
Available with
any cycle
except Rinse
Only
Activates the
heating element at
the end of a wash
cycle to speed
drying times. Heat
Dry defaults to On
when any cycle is
selected, except for
Express Wash and
Rinse Only.
Heat
Dry: 0:10
to 0:50
Extended
Heat Dry
(includes
Heat Dry
time): 0:40
to 1:20
0
Sani
Rinse
Sanitizes dishes and glassware in
accordance with NSF International
NSF/ANSI Standard 184 for Residential
Dishwashers. Certied residential
dishwashers are not intended for licensed
food establishments. Only sanitizing
cycles have been designed to meet
the requirements of the NSF/ANSI 184
performance standard for soil removal
and for sanitization efcacy. There is no
intention, either directly or indirectly, that
all cycles on a NSF/ANSI 184 certied
dishwasher meet the NSF/ANSI 184
performance standard for soil removal and
for sanitization efcacy. The Sani Rinse
indicator glows at the end of the cycle if
the Sani Rinse option was successfully
completed. If the indicator does not
activate, it is probably due to the cycle
being interrupted.
ProWash™
Normal
Increases the main
wash temperature
from 105°F (41°C)
to 140°F (60°C) and
the nal rinse from
140°F (60°C) to
155°F (68°C).
0:00 to
2:20
1.2 to 6.2
(4.8 to 23.3)
2-4-8 Hr.
Delay
Runs the dishwasher at a later time or
during off-peak electrical hours. Select a
wash cycle and options. Press the Delay
keypad. Press Start/RESUME. Close the
door rmly.
NOTE: Any time the door is opened (such
as to add a dish), the Start/RESUME
keypad must be touched again to resume
the delay countdown.
Available with
any cycle
Delays the start
of a cycle to the
specied time.
0 0
Control
Lock
Hold 3 Sec
Use the Control Lock option to avoid unintended use of dishwasher between cycles, and option changes during
a cycle.
To turn on Control Lock, touch and hold Control Lock for 3 seconds. Control Lock light will stay on for a short
time, indicating that it is activated. When the Lock indicator is lit, all keypad selections are disabled. If you touch
any keypad selection while your dishwasher is locked, the light ashes three times. The dishwasher door can
still be opened/closed while the controls are locked. To turn off Control Lock, touch and hold Control Lock for 3
seconds. Control Lock light turns off.