Operation Manual

11
6 - Press Start/Stop
The dishwasher will now start. It manages the
entire wash automatically. Ensure that the door is
properly closed or the machine will not start.
Changing options
If you want to change program after having started
the machine, press the Start/Stop button for three
seconds. Then select a new program and then
press the Start/Stop button again.
Do you want to load more dishes?
Carefully open the door; the machine will stops
automatically, put in the dishes, close the door and
the dishwasher will continue from where it left off.
If the machine is switched off from the main
switch
(or in the event of a power cut) before the washing
program has been completed, the interrupted
program will continue when the power comes
back on.
NB!
If the power is switched off, or if the door is open
for more than 2 minutes during drying, the
program is interrupted.
7 - After dishwashing
Once the machine has finished, it only draws
standby current. Turn off the water tap if the
machine is not to be used for an extended period,
such as during vacations, for example.
Eco-dishwashing
Only wash with a full load
Waiting to run the wash until the machine is full
saves energy.
Wash at a lower temperature
If the load is only lightly soiled, you can lower the
temperature.
Select program with Eco drying
To save energy, select Economy dry. You will get a
better drying result if you leave the door slightly
open after the end of the program.
Do not rinse before dishwashing
You do not need to rinse the dishes before loading
them into the machine. Just scrape off large food
particles before loading the machine.
Choose environmentally-friendly dishwasher
detergent
Read environmental declarations on the package!
Connect to cold water supply
For best performance it is recommended that
connection is to cold water.