Operation Manual

14
4. You can release and turn the pump blade by
inserting your finger into the hole and release
anything blocking it.
5. Reinstall the fitted piece and filters.
6. Plug the plug into the wall socket.
If the machine still does not start and a buzzing
sound is heard, the overflow guard has been
activated.
• Shut off the water.
• Pull the plug out from the wall socket.
• Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
The spray arms
Lower spray arm
Holes and bearings can sometimes become
blocked.
1. Pull the lower washer arm straight up to release
it.
2. Remove any deposits using a needle or similar.
The washer arms also have holes underneath.
To release the upper spray arm, the upper basket
must be removed.
3. Pull out the basket and turn the basket stop
outwards on both rails (see picture). The basket
can now be removed.
4. Remove the upper spray arm in the same way
as the lower arm and clean it.
Door
When cleaning the edge around the door, use only
a slightly damp cloth, possibly with a little
detergent. Do not use a spray bottle or similar
around the door catch. This is to ensure that water
does not penetrate into the door catch and come
into contact with the electrical components.
CAUTION!
Do not use a spray bottle or similar around the
door catch.
Tips!
In order to prevent bad odours in the dish-washer,
clean the strips and corners with a dish brush and
low-lather detergent.