Operation Manual

9. Place the spirit level on the dishwasher door to

check that the machine is level and adjust if

necessary. The door must be fully closed!

Note:

The dishwasher must be level!

An unlevel machine can affect the amount of water

taken in, the door can be difficult to close, and the

baskets difficult to place securely.

Step 2. Attaching cover or wooden door

Follow the separate instructions supplied with the

dishwasher to attach the chosen cover or wooden

door to the front of the machine.

Note:

Once you have fitted the cover or wooden door to

the dishwasher, the door springs may need

adjusting. Check that the door stays in the position

in which it is placed. If the door drops down when

you open it, the springs need tightening. If the door

shuts on its own, the springs need loosening. See

step 3 for further instructions.

MEASUREMENTS OVERVIEW – WOODEN

DOOR

FULLY INTEGRATED MODELS

Width: 596 mm

Height: 700 mm to 800 mm

Step 3. Adjusting the door springs

The door springs are on the sides of the

dishwasher.

If necessary, pull out the dishwasher and adjust the

tension of the door springs. A good idea is to try

adjusting one side only first.

1. Make sure that the door is closed.

2. Remove the L-shaped bracket

3. Adjust the spring setting

4. Open the door and check the spring tension; if

necessary repeat the procedure

If the spring setting still does not meet your

requirements

1. hold the front end of the spring, pushing it

upwards and forwards to remove it from the

support at the front